Daily Test - Furuno FS-1575 Service Manual

6.1.1 DAILY TEST

To open the "DAILY TEST" menu window, select [MENU] -> 1.TEST -> 1.DAILY
TEST. DAILY TEST is conducted in descending order displayed on the window. Even if
"NG" is detected in the course of any daily test, the test in progress will be conducted to
the end.
Program Name Function
Displays date and time on and at which the DAILY TEST was
TIME
conducted.
APP Displays the version of FS-xx75 application program.
Displays the program version of a device that converts serial data from
CPLD:
T-CPU into parallel format to control circuits. This program is
Complex
incorporated in the T-CPU board. The version remains unchanged even
Programmable
if the program is updated. The program is written at factory and not
Logic Device
allowed for any change.
Displays the version of backup BOOT program for 78K CPU (used for
NBDP).
78K BOOT This program is incorporated in the T-CPU board. The version remains
unchanged even if the program is updated. The program is written at
factory and not allowed for any change.
Displays the version of C-CPU backup BOOT program for C-CPU used
for the FS-2575C unit.
PANEL BOOT This program is incorporated in the C-CPU board. The version remains
unchanged even if the program is updated. The program is written at
factory and not allowed for any change.
RX
DSC
Displays self-test results, respectively.
WR1
For details, refer to information on the following page.
WR2
ALARM UNIT
Reference)
Program versions can also be verified by selecting [MENU] -> 9.SERVICE -> 5.TEST
-> 1.VERSION. For details, refer to information on page 6-23.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Table 6.1.2 Programs Displayed on DAILY TEST Window
6-2
6.1 [MENU] -> TEST
To print out daily test results,
press the [4] key.