Checking Detailed Software Version - Furuno FS-1575 Service Manual

• 2: Tone Test 2 (Fox):
• 3: Tone Test 3 (Beta):

2. Checking detailed software version

For details, refer to information on page 8-16.
Procedure)
1) Select "Selftest" from the [F6]: System Menu, and then press the [Enter] key.
2) "Selftest" will be executed and the results will be displayed. Check for the display in
the Software Ver column of the IB-585.
Reference)
Hold down the [Alt] and [F11] keys to display the version information for
developers.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Selecting this mode with the line connected
generates the following characters with the FS-xx75
system and transmits these characters; QBF.
"THE QUICK BROWN FOX ----- 7890"
Selecting this mode with the line connected
generates a beta signal (line control signal) with the
FS-xx75 system and transmits.
4-118
4.15 IB-585 Setting