2. Replacing MOT board
The method for connecting and disconnecting the flat cable is the same as that for
T-CPU.
The MOT board is connected to other boards with the binding-post type pin connector.
To mount the MOT board, align the guide pin for the connector of the MOT board with
the guide hole for other boards as well as the guide of the board mounting plate with the
guide hole in the MOT board.
Guide Hole for Board Connector
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Guide Pin for Board Connector
6-63
6.10 Replacement of Boards
Guide Hole in MOT Board and
Board Mounting Guide Pin