Making Setting Of "F6: System" Menu - Furuno FS-1575 Service Manual

4.15.4 Making Setting of "F6: System" Menu

Pressing the [F6]: System will display the window shown below.
To make "Slave Delay" setting and return this menu to "Default," the password should
be entered.
When the "Default" menu is executed, the set values of "System" will return to the
default.
Setting procedure)
1) Press the [F6] key to display the System menu.
2) Put the cursor on [Change], and then move down the cursor to a Submenu to be set
to make setting of this Submenu. However, "Slave Delay" cannot be selected.
Procedure for making "Slave Delay" setting and returning the setting to "Default")
1) Press the [F6] key to display the System menu.
2) Type the password: "DP6" in capital letter.
3) To make "Slave Delay" setting, put the cursor on [Change].
To return the "System" setting to the factory set, put the cursor on [Default], and
then press the [Enter] key.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
System
Setup Lock Change Default
Slave Delay
12 msec ( 0 - 50 msec )
TX/RX MSG Save OFF ON
Edit before Sending OFF ON
TX Power HIGH MID LOW
Header / Footer OFF ON
Time System OFF UTC SMT JST
Time & Date 16-Nov-2011 14:42:40
Window Color
Self Test
4-111
4.15 IB-585 Setting