Making Setting Of Submenu; Making Setting Of "F5: Station" Menu - Furuno FS-1575 Service Manual

4.15.2 Making Setting of Submenu "6. Manual Reception" of
"F3: Operate" Menu
Press the [F3] key, and then the [6] key. The "6. Manual Reception" window will appear.
Then, select on "AUTO."
Overview of setting
• AUTO: Automatically switches between ARQ mode and FEC mode according to
reception mode.
• ARQ: Receives messages only in ARQ mode.
• FEC: Receives messages only in FEC mode.
The set statuses listed above are known from the status display "Comm. Mode" of the
terminal unit. When this Submenu is set to "AUTO," the AUTO window will also
switch to the display of a mode being in communication.
For example, the "AUTO" window displays [ARQ] while in ARQ communication mode,
[CFEC] while in FEC-Collective mode, and [SFEC] while in FEC-Selective mode.

4.15.3 Making setting of "F5: Station" Menu

Submenus to be set are answerback code and ID number. Pressing the [F5] key will
display the window shown below.
1: Station Entry
2: Timer Operation Entry
3: Scan Entry
4: Answerback Code Entry
5: Group ID Entry (4/5 digit)
6: Group ID Entry (9 digit)
7: Select ID Entry (4/5 digit)
8: Select ID Entry (9 digit)
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Manual Reception
AUTO ARQ
Station
4-108
FEC
Submenus to be set
4.15 IB-585 Setting