Software Update Log - Furuno FS-1575 Service Manual

6.6.3 SOFTWARE UPDATE LOG

This menu is used to record updates of the programs of the FS-2575C unit every time
the program is updated. A maximum of 10 update logs are recorded and, when the
number of update logs recorded exceeds "10," the logs are erased in the order in which
they were recorded.
Reference)
When a combination of programs of the T-CPU of the FS-xx75T unit is different
from that of programs of the C-CPU of the FS-2575C unit, the programs of the
C-CPU will be replaced so that they will automatically come to the combination of
programs of the T-CPU.
To erase SOFTWARE UPDATE LOG, select
• [MENU] -> 9.SERVICE -> 4.RESTORE FACTORY SETTINGS, or
• CLEAR ALL (Set "S1" on the T-IF board to "ON," and then enter the password.)
The SOFTWARE UPDATE LOG window displays a serial number (1 to 10) and the
"APP" version of the FS-2575C unit. The "APP" version represents that selected by
[MENU] -> 9.SERVICE -> 5.TEST -> 1.VERSION -> [FS-2575C] -> "APP."
Note)
In the version configuration, a number like " --- 20111215" that represents a date
is given just for convenience sake.
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
6-44
6.6 MAINTENANCE LOG