11.7 Splash Protection for Modules and Battery Box Retainer
Battery box retainer, assembled
15
12
1 Battery box retainer
4 2x Screw M8x35
7 2x Tapping screw 3,8x10
10 4x Washer 7x3,2x0,4
13 Lighting- / adjustment module
16 Screw M10x50 with washer and lock nut M10
18 Screws M5x16 with washers and lock nuts nuts M5
I I n n s s p p e e c c t t i i o o n n
Splash protection damaged?
Screwings loose?
Battery box retainer damaged?
Disassembly splash protection
Lift seating system and lock, if necessary.
Loosen tapping screws (7) completely and detach splash protection (6) from the battery box retainer.
Assembly
The assembly is performed in the reverse order.
Disassembly Battery Box Retainer
Separate seating system from chassis and remove splash protection of the modules.
Remove battery boxes.
Detach the plug for the drive motors from the main module and, if necessary, detach the plugs of
actuators and lighting from the lighting or lighting / adjustment module.
Remove screw with washers and nut (16) completely and separate actuator (14) or threaded spindle from the
battery box retainer
If required, remove cable binders of the connection cable from the actuator (14).
Remove screws with washers (2 and 3) plus screws with washers and nuts (4, 3 and 5) completey and
detach battery box retainer (1) from the chassis.
Loosen screws with washers and, if appropriate, with nuts (18) completely and detach modules.
Loosen screws with washers and nuts (8, 9 and 10) completely and detach the connection socket with holder
(15) from the battery box retainer (1).
Assembly
The assembly is performed in reverse order.
62
1
18
11
14
13
16
2 2x Screw M8x20
5 2x Nut M8 Stop
8 2x Screw M3x27
11 Main module
14 Actuator (seat adjustm.)
Battery box retainer, disassembled
3
8
2
10
10
1
9
17
3 6x Washer 16x8,4x1,5
6 Splash protection
9 2x Nut M3 Stop
12 Lighting module
15 Connection socket with holder
17 Bore holes for modules
R R e e m m e e d d y y
> Replace splash protection.
> Tighten screws.
> Replace battery box retainer.
NOTE:
Do not forget the cable binders.
In TÜV-Version: Do not forget spring steel sheet
for microswitch.
4
3
7
5
6
16