11.5 Wheel Suspension in the Rear with Shock Absorbers, Support Castors, Support Plates and Rear Wheel Link
Wheel suspension, disassembled
8
12
4
13
12
11
9
1 Chassis
4 Support castor
7 Washer 8,4x25x2
10 4x Lock nut M8
13 Bushing RD 12x1,8x18
16 4x Screw M6x30 with washer
19 Metal link bushing
22 Bushing RD 19x18
25 Stopper POP 1093
I I n n s s p p e e c c t t i i o o n n
Support wheel damaged?
Support plate deformed / damaged?
Shock absorber too soft / damaged?
Screws loose?
Rear reflector damaged?
Rear wheel link damaged?
Disassembly support wheels
Remove rear battery box.
Loosen completely screw (9) and nut (10) at lower part of the support plate (3).
Remove support castor (4) completely with bushings (12 and 13) plus washers (11) from the support plates (3).
Montage
The disassembly is performed reverse order.
6
17
7
5
10
3
3
11
2
2 Drive unit, complete
5 Shock absorber
8 Bushing RD 22x12, ALU
11 11x Washer 8,4
14 Rear reflector (not shown)
17 Bowden cable holder
20 Screw M12x160
23 Nut M12 Stop
26 Washer
16
18
21
22
1
26
20
25
R R e e m m e e d d y y
> Replace support wheel.
> Straighten or replace support plate.
> Replace shock absorber.
> Tighten screws.
> Replace rear reflector.
> Replace rear wheel link.
NOTE:
The support plates (3) are available in 2 versions
(long and short).
21
24
19
23
15
3 Support plate, short
6 Screw M8x50
9 4x Screw M8x75
12 Bushing RD 10x0,95x31,5
15 Disengaging mechanism
18 Rear wheel link
21 Support disc RD 25x4
24 Bushing RD 18x2,5x49,4
59