5.6
Wheelchair Equipment: with 12 V Lighting (TÜV version), with
Modules:
Cables:
Additional Power Supply:
Serves to keep up the power supply of the lighting module 12 V via the ACS
BUS cable in case of power failure, thus ensuring full service of lighting
system and warning flashers.
5.7
Wheelchair Equipment: with electrically adjustable RECARO Seat
The basic equipment of the RECARO seat consists of the
following components:
Modules:
Cables:
The voltage transformer serves the power supply of the
RECARO seat.
Depending on the type of wheelchair, the further equipment
can be added according to chapters 5.2 to 5.3.
14
Actuators
Main module (power module)
Lighting / actuator module
(combined lighting + actuator module)
12 V lighting module
Joystick box
Control unit for actuators
(in older joystick boxes, adjustment
options cannot be controlled via the
joystick box)
Microswitch
BUS cable to joystick box
BUS cable from power module to
lighting/actuator module
BUS cable to lighting module
Battery cable
Cable to microswitch
Cable for additional power supply
12V lighting cable
Cable for actuators
Main module (power module)
Voltage transformer
Joystick box
BUS cable to joystick box
Battery cable
Power supply cable for
voltage transformer with 15 A fuse
Module and Cable Equipment
Lighting/Actuator
Main Moduleer
Module
to
Control Unit
Actuators
Battery
Cable
Additional Power Supply
Module and Cable Equipment
to Joystick Box
Main Module
15A Fuse
12 V Lighting Module
to
Joystick Box
Mikro-
12 V Lighting
switch
Cable
Voltage
Transformer
Connection for RECARO Seat