5.0 Modules
The equipment with modules depends on the type of wheelchair.
The basic equipment consists of the main module with its respective
joystick box.
For a joystick box, any model can be used that is no older than the
original joystick box. INVACARE joystick boxes are backward but not
forward compatible.
Modules for the wheelchair lighting or for the actuators for the
adjustment of the seat and legrest angles can be installed additionally.
5.1
Wheelchair Equipment: without lighting, without actuators
Modules
Cables
:
5.2
Wheelchair Equipment: with lighting 24 V, without actuators
Modules:
Cables :
5.3
Wheelchair Equipment: without lighting, with actuators
Modules:
Cables:
12
: Main module (power module)
Joystick Box
BUS cable to joystick box
Battery cable
Main module (power module)
Lighting module 24 V (Lighting 24 V)
Joystick box
BUS cable to joystick box
BUS cable from main module to lighting module
Battery cable
Lighting cable
Main module (power module)
Lighting- / adjustment module
(Combined lighting + actuator module)
Joystick box
Control unit for actuators
(In older joystick boxes, the actuators
cannot be controlled via the joystick box.)
BUS cable to joystick box
BUS cable from the main module to the
lighting / actuator module
Battery cable
Cable to actuators
Cable to control unit for actuators
(Only, if control unit is available.)
Module and Cable Equipment
Main Module
Battery Cable
Module and Cable Equipment
Power Module l
Lighting
Module
Battery Cable
Lighting Cable
Module and Cable Equipment
to Control Unit
Lighting/adjust-
ment module
Actuators
to
Joystick Box
to
Joystick Box
Power module
to
Joystick box
Battery cable