11.8 Kerbstone Lifter
Kerbstone lifter, assembled
1
2
1 Chassis
4 4x Washer
7 4x Washer
10 2x Stopper
13 2x Bushing
16 Lifter shoe
I I n n s s p p e e c c t t i i o o n n
Lifter shoe damaged?
Screwings loose?
Compression spring damaged?
Weldment joints or kerbstone lifter support damaged?
Weldment joints or kerbstone-lifter fork defective?
Disassembly, complete
Lift seating system and lock, if necessary.
If necessary, remove lifter shoe (16).
Loosen nuts (8) completely and detach together with washers (7).
Remove screws (6) with washers (7) and detach compression spring (5).
Remove two stoppers (10) and loosen nut (15) completely.
Remove screw (11) with washer (12) and detach kerbstone-lifter fork (9) from the lifter support.
If necessary, remove bushings (13) and press out ball bearing (14).
Loosen four screws (3) completely and remove together with washers (4).
Detach kerbstone lifter support (2) from chassis (1).
Montage
The assembly is performed in reverse order.
9
16
2 Kerbstone lifter support
5 Compression spring
8 2x Lock nut
11 Screw
14 2x Ball bearing
4
3
8
7
6
5
8
R R e e m m e e d d y y
> Replace lifter shoe.
> Tighten screws.
> Replace compression spring.
> Replace kerbstone lifter support.
> Replace kerbstone-lifter fork.
Kerbstone lifter, disassembled
4
11
12
13
7
9
14
15
10
7
3 4x Screw M8x20
6 2x Screw
9 Kerbstone-lifter fork
12 Washer
15 Lock nut
10
14
6
16
63