Seat Cushion, Apron With Pocket And Seat Plate - Invacare STORM Service Manual

9.12 Seat cushion, apron with pocket, and seat plate
Storm Comfort, complete
1 Seat cushion
4 Velcro fastener strips, glued
7 Quick release bolt

NOTE:
• The seat plate can be provided with different types of seat cushions.
• The Velcro fastener strips under the seat cushion are clamped.
I I n n s s p p e e c c t t i i o o n n
• Seat cushion damaged?
• Apron with pocket damaged?
• Velcro fastener damaged?
• Screwings loose?
• Seat plate damaged?
• Cable clamps damaged?
Disassembly, complete
• Lift seat cushion (1) slightly at the front and pull upwards from the seat plate (3).
• Remove apron with pocket (2) from the seat plate.
• If necessary, lift seating system (electrically or manually) and lock, if appropriate.

NOTE:
For a mechanical seat recline adjustment, loosen first the quick release bolt (7). After that, the seat (3)
can be lifted completely. The seat should be supported by means of a suitable object.
• If required, press connector cable (8) for the actuator out of the cable clamps (6).
• Remove tapping screws (5) entirely and lift the seat plate (3) from the seat frame (9).
• If required, remove defective Velcro fasteners (4) or cable clamps (6) from the seat plate (3) and replace
(glue).
Assembly
• Proceed with the assembly in reverse order.
40
1
9
2
2 Apron with pocket
5 4x Tapping screw 4,8x18
8 Connection cable
Seat plate, mounted
Seat plate from below (lifted)
8
6
3 Seat plate
6 Cable clamps, glued
R R e e m m e e d d y y
> Replace seat cushion.
> Replace apron with pocket.
> Replace Velcro fastener.
>Tighten screwings.
> Straighten, replace seat plate.
> Replace cable clamps.
4
5
3
3
9
7