Disassembly of Standard Legrests (complete)
Detach calf belt (13) from legrest lower part (8).
Release legrest lock (5) and lift legrest from hinge bolts (3 and 4).
Loosen screw (9) and pull legrest upper part (6) from legrest lower part (8).
Loosen tapping screw (11) completely and detach footplate (10) from legrest lower part (8).
If required, remove slide pieces (7) and caps (12).
NOTE:
The slide pieces are inserted. They can be lifted up with a suitable tool,
such as a screwdriver.
Assembly
The assembly is performed in the reverse order.
NOTE:
During the assembly, pay attention to the correct location of the parts (left, right).
Adjust legrests to equal length.
Disassembly of Standard Legrests with Angle Adjustment (complete)
Detach calf belt (13) from the insert tube (14).
Release legrest lock (5) and detach legrest from the hinge bolts (3 and 4).
Loosen screw (9) and pull legrest upper part (6) from the insert tube (14).
Loosen tapping screw (11) completely and detach footplate (10) from the footplate tube (15).
Loosen nut (19) and, together with washer (18), separate from screw (16).
Detach screw (16) and washer (18) and separate footplate tube (15) from the draw-pull tube (14).
If required, loosen nut (20) and remove together with tapping screw (17).
If required, remove slide pieces (7) and caps (12).
NOTE:
The slide pieces are inserted. They can be lifted out with an appropriate
tool, such as a screwdriver.
Assembly
The assembly is performed in the reverse order.
NOTE:
During the assembly, pay attention to the correct location of the parts (left, right).
Adjust legrests to an equal length.
Adapt locking screws (17) correctly and secure with nuts (20).
27