Table of Contents
Advertisement
11.12 Replacing Battery Box Retaining Strap - 22NF Battery Base Frames
For this procedure, refer to FIGURE 9.
1.
Remove the battery box. Refer to Removing/Installing the 22NF
Battery Box on page 100.
WARNING
The retaining strap MUST be fed through the
adjustable end of the battery box retaining strap
clip as shown in FIGURE 9.
2.
Feed the battery box retaining strap through the adjustable end of
the battery box retaining strap clip.
3.
Feed the battery box retaining strap through the slots in the battery
box tray.
The folded over portion of the retaining strap
stops at the slot. DO NOT try to force the
folded over section through the slot.
4.
Install the new battery box retaining strap by reversing STEPS 2 and
3.
5.
Reinstall the battery box. Refer to Removing/Installing the 22NF
Battery Box on page 100.
WARNING
The Battery Box Retaining Strap MUST be
fastened securely in place before using the
wheelchair.
Part No 1143151
Tray shown by itself for clarity. There is no need
to remove the tray from the wheelchair if the
strap is being replaced.
Retaining Strap
Battery Box
Tray
FIGURE 9
Replacing Battery Box Retaining Strap - 22NF Battery
111
11 SETUP/MAINTENANCE
Retaining Strap Clip
Retaining Strap
Slot
Slot
Folded Over Portion of Retaining Strap
Base Frames
Invacare 3G Storm Series®
Hide quick links:
Advertisement
Table of Contents
