Invacare STORM Service Manual page 25

Disassembly, complete
The following steps apply to both legrests!
• Remove calf belt (33) from footboard receptacle (9).
• Grasp footboard (11) by its left side and turn upwards until it is released from the left footboard receptacle (9).
• Release legrest lock (5) and lift legrest from the hinge bolts (3 and 4).
• Loosen wing screw (22) and pull the footboard receptacle (9) with the width compensation (10) out of the
insert tube (8).

NOTE:
In the preceding step, the footboard receptacle (9), the width compensation (10) and the footboard (11)
of the right legrest are simultaneously separated from the insert tube (8).
• Release cap nut (21) and pull the insert tube (8) out of the slide tube (7).
• Loosen clamp (18) and remove from the slide tube (7) together with screw (19), washer (20) and cap nut
(21).
The two following steps are applicable to the right legrest only!
• Release tapping screw (29) completely and pull the footboard receptacle (9) together with the width
compensation (10) out of the footboard (11).
• Remove leaf spring (31) from the footboard (11).
The following steps are applicable to both legrests!
• Detach cap (17), release nut (26) from countersunk screw (25), and detach footboard receptacle (9) with
bushing (14) from the width compensation (10).
• If required, unscrew locking screw (23) with counter nut (24) from the width compensation (10).
• Remove cap (17), unscrew hexagon head screw (13) from the cone (16) and detach screw (13) with washer
(15), bushing (14) and cone (16) from the upper part of the legrest (6).
• Separate slide tube (7) from the upper part of the legrest (6).
• If necessary, remove slide pieces (27, 28 and 32) plus cap (30).

NOTE:
The slide pieces are inserted. They can be lifted by means of a suitable tool,
for instance a screw driver.
Assembly
The assembly is performed in the reverse order.

NOTE:
• During the assembly, please pay attention to the correct location of the parts
(left, right).
• Insert leaf spring (31) correctly.
• Adjust legrests to equal length.
• Adjust locking screws (23) correctly and secure with nuts (24).
25