Lighting Bar / Bumper Bar - Invacare STORM Service Manual

11.10 Lighting Bar / Bumping Bar
Lighting bar, assembled
9
4
14
1
1 Chassis
2 Rear covering
3 Lighting bar
4 Rear lights
5 Incandescent bulbs
6 Cable harness
7 Cable clips
8 Plug assembly with anti-interference capacitors
9 4x Tapping screw 3,9x15,5
10 4x Phillips screw M5x20
with lock nut M5
11 2x Screws M6x20 with lock nuts M6 and 4 washers 18x6,4x1,5
12 2x Screws M8x20 with washers
I I n n s s p p e e c c t t i i o o n n
• Bumper bar damaged?
• Screwings loose?
• Rear covering damaged?
• Lighting bar damaged?
Disassembly bumping bar with rear covering
• Remove rear battery and fold rear covering (2) upward.
• Loosen screws with washers (11) completely and detach together with bumper bar (13).
• Loosen screws with washers (12) completely and detach together with rear covering (2).
Assembly
• The assembly is performed in the reverse order.
Disassembly lighting bar with rear covering
• Remove rear battery and fold rear covering (2) upward.
• Separate plug connections (8) and release cable harness (6) from the cable clips (7).
• Loosen screws with washers and nuts (11) completely and detach lighting bar (3).
• If required, loosen screws (9) completely and remove rear light caps.
• If required, remove lamps (5), separate plug connections in the lamps, loosen screws with nuts (10)
completely, and detach the rear lights (4) from the lighting bar (3).
• If required, detach the microswitch (14) from the rear covering (2) (2 countersunk screws M4x20).
• Loosen screws with washers (12) completely and remove together with the rear covering (2) from the chassis.
Assembly
• The assembly is performed in reverse order.
8
3
11
7
6
13 Bumper bar
Lighting bar / bumper bar, disassembled
13
9
4
2
5
4
10
5
R R e e m m e e d d y y
> Replace bumper bar.
> Tighten screws.
> Replace rear covering.
> Replace lighting bar.
2
11
12
2
3
12
14 Microswitch
11
65