17.8 Microswitch
Disassembly
Lift the seat and remove the splash protection. See Chapter 11.7
in this respect.
Remove the cable of the switch from the lightening module
Remove the cable of the microswitch from left frame tube
of the chassis.
Fold the rear-light board upwards and detach the microswitch
by loosening the fastening screws (SW 7).
Assembly
Mount the new switch.
Lead the cable of the microswitch once again through the left
frame tube of the chassis to the 12 V lightening module.
Insert the BUS plug into the modules socket board.
The arrangement of the plugs can be seen on the connecting
plan.
Mount splash protection.
Fold the rear-light board down again (driving position).
Installing Position of the Microswitch
Connecting Plan of the Microswitch
Hauptmodul
Power Module
Bedienelemente
Verstellmotoren / Licht
Remote
actuators / Light
(z. B. Mikroschalter)
103