Disassembling / Checking Flasher - Invacare STORM Service Manual

15.4 Disassembly / Test of Front Flasher
Disassembly
• Loosen the fastening screw and remove the flasher glass.
• Unlock the light bulb by pressuring down slightly and turning
by 1/8th rotation to the left.
• Pull the light bulb from the base.
Testing
• Test by means of a multimeter the voltage existing between the
contact in the flasher casing (+ pole) and the lamp base (- pole).
Voltage in: 6 km/h wheelchair
10 km/h wheelchair (abroad)
10 km/h wheelchair (Germany)
CAUTION:
Avoid bridging the poles by all means.
>Danger of Fire and Burning<.
Montage
• Insert the new light bulb.
Type of bulb: 6 km/h wheelchair
10 km/h wheelchair (abroad)
10 km/h wheelchair (Germany)
• Lock the light bulb by pressing down slightly and turning
by 1/8th rotation to the right.
• Mount the flasher glass.
• Fix the flasher glass by means of the fastening screw.

NOTE:
Make sure when mounting the flasher glass that the tab
on the side of the glass interlocks with the slot of the
flasher casing.
Removing Flasher Glass
Fastening screw
Removing Light Bulb
Testing Voltage
= 24 V
= 24 V
= 12 V
Mounting Flasher Glass
Flasher glass
= 24 V / 10 watts
= 24 V / 10 watts
= 12 V / 10 watts
Light bulb
Flasher casing
–
+
V
Lamp base
Slot in flasher casing
81