Invacare STORM Service Manual page 83

Disassembly Flasher
• Loosen tapping screw (8) completely and detach flasher glass (16).
• Press down flasher bulb (18) slightly, turn by 1/8th revolution to the left, and pull from the base (11).
• Loosen screw (9) and detach.
• Turn flasher casing (17) slightly left / right and carefully pull from the lampholder (1) until
connection cable (4) is released.
• Pull mirror with lamp base (11) carefully from the flasher casing (17) up to the point where the
connections at the lamp base become accessible.
• Mark the connections, unsolder from the lamp base and detach mirror with base (11).
• Pull connecting cables (4) from the flasher casing (17) and detach the casing.
Assembly
• The assembly is performed in the reverse order.
Disassembly Lampholder
• Detach headlight (3) completely.
• Detach flasher (2) completely.
• Remove cable binder (10).
• Loosen screw and washer (5) completely and detach together with lamp holder(1).
• If necessary, remove washer and rubber bushing (6) from the chassis (12).
Assembly
• The assembly is performed in the reverse order.

NOTE:
• Do not forget the cable binder.
83