Status Display (Error Display); Microswitch - Invacare STORM Service Manual

4.3 Status Displays (Error Displays)
Status displays are LEDs which by blinking point to errors in the
wheelchair’s electric system.
The following joystick boxes have a status display:
• Standard joystick box
• Chin control
• Table and central control
Die ON / OFF LEDs of these joystick boxes are arranged as status
displays. The causes of the errors are displayed by a flashing interval
(flashing code) of these LEDs.
The remaining modules are also equipped with status displays.
A flashing of these displays calls the attention to an error in the
module.

NOTE:
The ACS is equipped with an error memory, which can be evaluated by means of a commercially
available PC. The additionally required hard and software can be ordered from
INVACARE Deutschland GmbH under Part No..: P10 076.

4.4 Microswitch

The microswitch is only mounted in connection with lighting module 12 V
(TÜV version). The switch is attached to the rear light assembly bar.
It switches the wheelchair off as soon as the rear light assembly bar is
opened, thus preventing that the wheelchair is driven with a rear light
assembly bar that is not correctly closed.
Status Displays of the Joystick Boxes
Standard Table and Central
Joystick Box Control
Chin Control
Mikroswitch
Installing position of the microswitch.
11