5.4
Wheelchair Equipment : with Lighting 24 V, with Actuators
Modules
Cables
5.5
Wheelchair Equipment: with Lighting12 V (TÜV version), without actuator
Motors
Modules:
Cables:
BUS cable to joystick box
BUS cable from power module to lighting module
Battery cable
Cable to microswitch
Cable for additional power supply
Lighting cable 12 V
Additional Power Supply:
Serves to keep up the power supply of the lighting module 12 V via
the ACS BUS cable in case of power failure, thus ensuring full service
of lighting system and warning flashers.
Main module (Power Module)
Lighting / Adjustment module
(Combined lighting + actuator module)
Joystick box
Control of actuators
(With older joystick boxes adjustment options
cannot be controlled via the the joystick box.)
BUS cable to joystick box
BUS cable from power module to lighting /
actuator module
Battery cable
Cable to actuator motors/lighting cable
(In rare instances, two separate cables)
Cable to control unit for actuators
(Only, if control unit is available)
Main module (power module)
Lighting module 12 V
Joystick box
Microswitch
Module and Cable Equipment
to control unit
Lighting/Actuator
Module
Lighting Cable
Actuators
Module and Cable Equipment
to Joystick Box
Power Module
Battery
Cable
Additional
Power Supply
Power Module
to
Joystick Box
Battery Cable
Lighting Module 12 V
Micro-
switch
Lighting Cable 12V
13