Checking Overall Voltage of the Batteries
Check the overall voltage of the batteries with a multimeter
(range 50V / 25 DC) at the charging socket of the joystick box.
I I n n s s p p e e c c t t i i o o n n
Voltage below 24 V?
Voltage below 19 V?
Voltage at zero?
NOTE:
The internal battery has external contacts (2) with the 24 V-
supply of the wheelchair, as well as internal contacts (5) with
the serial connection with the external contacts of the external
battery.
To measure the voltage, open the locking belt (9) and
remove the lid of the battery box (1).
Testing the individual voltage of the batteries
For the removal of the batteries, see Disassembly, below.
Measure the individual voltages of both batteries with a
multimeter (range 50V / 25V DC).
I I n n s s p p e e c c t t i i o o n n
Voltage below 9,5 V?
Voltage at zero?
Disassembly
Grip lighting bar at its center and turn upwards.
Hold battery boxes one after the other by the locking belt (9),
support with your other hand, and pull backwards from the
battery frame.
Loosen the locking belt (9) and take off the lid (1).
Loosen the screwings (first the negative pole) of the pole
binders (6 and 7) and detach binders with fuse plus the
lid from the battery and the box.
Loosen the nuts and washers at the external (2) and internal
contacts (5) inside the lid (1), and detach the cable harness
completely from the lid (1).
Lift battery (8) from the box with the aid of the locking belt (9).
Pull the locking belt (9) out of the box.
Assembly
Follow the steps in reverse order.
R R e e m m e e d d y y
> Charge batteries (see chapter 12.2).
> Check individual voltage of each battery.
> Check individual voltage of each battery.
R R e e m m e e d d y y
> Precharge batteries (see chapter 12.2).
> Check master fuse (50A) of the battery
plus internal cables and replace,
if necessary, or replace battery
+
V
Battery, inside
!
$
1 Battery-box lid
2 External contacts of the cable harness.
3 Connection diagram for the batteries
4 Cable harness, complete
5 Internal contacts of the cable harness.
6 Terminal (+) and master fuse
7 Terminal (-)
8 Battery
9 Locking belt
10 Guide pins
#
"
$
$
%
&
&
außen
innen
Charging Socket
"
#
&
%
Battery Boxes
"
'
%
67