Invacare STORM Service Manual page 29

Disassembly (complete)
• Detach calf belt (20) from insert tube (7).
• Release legrest lock (5) and lift legrest from hinge bolts (3 and 4).
• Loosen screw (17) and pull legrest upper part (6) from the insert tube (7).
• Loosen tapping screw (18) completely and detach footplate (10) from the footplate tube (9).
• Loosen nut (15) and, together with washer (14), separate from screw (1).
• Detach screw (12) and washer (14) and separate footplate tube (9) from the insert tube. (7).
• If required, loosen nut (16) and remove together with locking screw (13).
• If required, remove slide piece (11) and caps (19).

NOTE:
The slide pieces are inserted. They can be lifted up with a suitable tool,
such as a screwdriver.
• If necessary, loosen screw (22) and detach guard disc (21) from footplate (10).
Assembly
The assembly is performed in the reverse order.

NOTE:
• During the assembly, pay attention to the correct location of the parts (left, right).
• Adjust legrests to an equal length.
• Adapt locking screws (17) correctly and secure with nuts (20).
29