Ricoh 920F Operating Instructions Manual page 1033

4. Monitoring and Configuring the Printer
Name registration failed. name=<NetBIOS name> Name registration of <NetBIOS Name> failed.
Name registration success in Broadcast
name=<NetBIOS name>
Name registration success. WINS server=<WINS
server address> NetBIOS Name=<NetBIOS
name>
npriter start. (NetWare)
4
Open log file <file name>
Printer <printer name> has no queue
Printer queue <print queue name> cannot be
serviced by printer 0, <print server name>
Print server <print server name> has no printer
Print sessions full
pserver start. (NetWare)
Required file server (<file server name>) not found The required file server <file server name> could
sap enable. saptype=<SAP type>, sapname=<SAP
name>
session_IPv4 <community name> not defined.
session_IPv6 <community name> not defined.
220
Message Problem and solutions
Change to a different NetBIOS name.
Name registration by <NetBIOS Name>
broadcast was successful.
Name registration of <NetBIOS Name> to <WINS
server address> was successful.
(In the remote printer mode) The NetWare service
has started.
(In the print server mode) The specified log file has
been opened.
(In the print server mode) The print queue is not
assigned to the printer. Using NWadmin, assign the
print queue to the printer, and then restart it.
(In the print server mode) The print queue cannot
be established. Make sure that print queue exists
on the specified file server.
(In the print server mode) The printer is not assigned
to the print server. Using NWadmin, assign the
printer, and then restart it.
No more print jobs can be accepted. Wait a while
before sending any more print jobs.
(In the print server mode) The NetWare service has
started.
not be found.
The SAP function was started. The SAP packet is
issued to advertise the service in the SAP table on
the NetWare server.
The requested community name is not defined.
The requested community name is not defined.