5. Registering Addresses and Users for Facsimile/Scanner Functions
Changing the protocol
This section describes how to change the protocol.
1.
Select [SMB] or [FTP] using [ ] or [ ], and then press the [OK] key.
A confirmation message appears.
2.
Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
5
3.
Enter each item again.
Deleting an NCP Folder
This section describes how to delete the registered NCP folder.
1.
Press the [User Tools/Counter] key
2.
Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3.
Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
316