Functions Not Available For Internet Fax Reception; E-Mail Subject; T.37 Full Mode - Ricoh 920F Operating Instructions Manual

1. Transmission

Functions Not Available for Internet Fax Reception

This section tells you which functions are not available for Internet Fax reception.
1
The following functions are available for standard fax reception, but not for Internet Faxing:
• Memory Lock Reception
• SEP Code reception
• Authorized Reception

E-mail Subject

If you do not enter a subject when sending e-mail, a subject will be auto generated. This section explains
how to specify the content of auto-generated subjects.
Subjects differ depending on Stamp Sender Name settings. For details about using the Stamp Sender Name
function, see "Sender Settings".
When Stamp Sender Name is set to on:
From Sender Name(Fax Message NO.xxxx)
When Stamp Sender Name is set to off:
• If Own Fax Number and Own Name are programmed:
From "Own Fax Number"("Own Name")(Fax Message NO.xxxx)
• If only Own Fax Number is programmed:
From "Own Fax Number"(Fax Message NO.xxxx)
• If only Own Name is programmed:
From "Own Name"(Fax Message NO.xxxx)
• If neither Own Fax Number nor Own Name are programmed:
Fax Message NO.xxxx
• "xxxx" is the document number that appears in the Journal.
• p.101 "Sender Settings"

T.37 Full Mode

This machine is T.37 full mode compatible. T.37 full mode is an international standard for Internet Fax
transmission. (ITU-T Recommendation, RFC2532)
34