Search By Ldap Server - Ricoh 920F Operating Instructions Manual

1. Transmission
If you enter the wrong destination, before pressing the [OK] key, press the [Clear/Stop] key, and
then enter the correct destination.
7. Check the characters you have entered are correct, and then press the [OK] key.
1
When the search is finished, the results appear.
8. Select a destination using [ ] or [ ], and then press [ ] to specify it (put a tick against it).
Multiple destinations can be selected.
Press [ ] to deselect a destination.
9. Press the [OK] key.
• If no destination matches the specified text, the "Specified destination is not programmed." message
appears. Press [Exit] to return to the display of step 4.
• You cannot specify destinations twice. If you try, the "This destination has already been programmed."
message appears. Press [Exit] to return to the standby screen.
• Press [Add Dest] to specify other destinations.

Search by LDAP Server

This section explains how to search for a destination registered in the Address Book using the LDAP server.
• This function is not available if [LDAP Search] is set to [Off] under Administrator Tools, in the System
Settings menu.
86