If Usb Connection Fails - Ricoh 920F Operating Instructions Manual

4. Troubleshooting When Using the Printer Function

If USB Connection Fails

This section describes how to troubleshoot a problem related to USB connections.
Problem
The machine is not
automatically recognized.
4
Windows has already
configured the USB settings.
58
Cause
The USB cable is not
connected properly.
Check whether the computer
has identified the machine as
an unsupported device.
Solution
Disconnect the USB cable, and then turn
off the main power switch. Turn the
machine on again. When the machine
has fully booted up, reconnect the USB
cable.
Open Windows' Device Manager, and
then, under [Universal Serial Bus
controllers], remove any conflicting
devices. Conflicting devices have a [!] or
[?] icon by them. Take care not to
accidentally remove required devices.
For details, see Windows Help.