5. Securing Information Sent over the Network or Stored on Hard Disk
11.
Press [Program].
12.
Select the users or groups to register.
You can select more than one user.
By pressing [All], you can select all the users.
5
13.
Press the [OK] key.
14.
Select the permission, and then press the [OK] key.
Select the permission, from [Read-only], [Edit], [Edit/Delete], or [Full Control].
To register multiple users, repeat steps 12 to 14.
15.
Press the [User Tools/Counter] key.
• p.32 "Logging on Using Administrator Authentication"
• p.33 "Logging off Using Administrator Authentication"
Encrypting Data in the Address Book
This can be specified by the user administrator.
120