When Memory Is Full - Ricoh 920F Operating Instructions Manual

Problem
Copies are not in correct
order.
When using "Duplex", copy is
made top to bottom even
though [Top to Top] is
selected.
Parts of the original image are
not copied.
Parts of the original image are
not copied.

When Memory Is Full

This section describes likely causes of and possible solutions for problems related to full memory.
Message
"Press [Resume] to scan and
copy remaining originals."
Cause
You placed the originals in
the incorrect order.
You placed the originals in
the wrong orientation.
The margin is too wide.
There is a lack of margin
space on the opposite side of
the binding position.
Cause
The machine checked if the
remaining originals should be
copied, after the scanned
originals were printed.
When You Cannot Make Copies As Wanted
Solution
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place an original on the exposure
glass, start with the first page to be
copied.
Place the original in the correct
orientation. See "Duplex Copying",
Copy Reference .
Set a narrower margin with User Tools.
See "User Tools Menu", Copy Reference
.
Set a narrower margin with User Tools.
See "User Tools Menu", Copy Reference
.
Solution
To continue copying, remove all copies,
and then press [Resume]. To stop
copying, press [Stop].
2
29