Ricoh 920F Operating Instructions Manual page 1285

4. Troubleshooting When Using the Printer Function
Problem
Printed images contain blots
or are patchy.
Printed images contain blots
or are patchy.
Printed images contain blots
or are patchy.
4
Printed images contain blots
or are patchy.
Images smudge when
rubbed. (Toner is not fixed.)
The printed image is different
from the image on the
computer's display.
The image is too dark or too
light.
68
Cause
Printing on coarse paper or
treated paper can result in
faint print image.
The paper is damp.
Check the machine is set on a
level surface. The machine
must be placed on a stable
and level surface.
The paper is creased, curled,
or has blemishes.
The specified paper type and
the paper that is actually
loaded might be different. For
example, thick paper might
be loaded but not specified
as the paper type.
Printing will be performed by
the machine's graphic
processing function.
The correct paper type
settings are not made.
Solution
Use supplier-recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine
Check the environment of location to
select an appropriate location. See
"Where to Put Your Machine", About
This Machine .
Smooth out the wrinkles from the paper,
or replace it. See "Recommended Paper
Sizes and Types" and "Unusable Paper",
About This Machine
• PCL 5e
On the [Paper] tab, select a proper
paper type in the [Type:] box.
• PCL 6
On the [One Click Presets] tab,
select a proper paper type in the
[Paper Type:] box.
• PostScript 3
On the [One Click Presets] tab,
select a proper paper type in the
[Media Type:] box.
• Only when using PCL 6
On the [Detailed Settings] tab,
select [Raster] in the [Raster/
Vector:] box on the [Print Quality].
Check the paper loaded on the paper
tray or bypass tray matches the paper
type set on the display panel. See
"Recommended Paper Sizes and
Types", About This Machine
.
.
.
.