Ricoh 920F Operating Instructions Manual page 555

Example: The standby display
• When the instruction "Press [
• When the instruction "Press [Tone]" appears in this manual, press the middle selection key.
• When the instruction "Press [TX Mode]" appears in this manual, press the right selection key.
2. [Escape] key
Press to cancel an operation or return to the previous display.
3. [OK] key
Press this to set numeric values, make settings, or select an entered item.
4. Scroll keys
Press to move the cursor to each direction one by one.
When [ ], [ ], [ ], or [ ] appears in this manual, press the scroll key of the same direction.
1. Machine status and message
2. Destination entry
3. Selection keys
4. Switches the destination type between
To specify fax numbers or IP-Fax destinations, select
To specify Internet Fax destinations (e-mail addresses), select
5. Selectable items
• The display will differ depending on installed optional units.
• You can change Internet Fax setting under E-mail Settings in the Fax Features menu. See "E-mail
Settings".
• You can change IP-Fax settings under IP-Fax Settings in the Fax Features menu. See "IP-Fax Settings".
14
]" appears in this manual, press the left selection key.
BAM005S
(fax or IP-Fax) and
.
.
(Internet Fax).