Ricoh 920F Operating Instructions Manual page 581

1. Transmission
• The blank sheet-detecting function is ineffective for second and subsequent pages.
This function notifies you if an original is placed wrong side down on the scanner. When this happens, a
message appears for a few seconds. The message differs depending on the number of pages to be scanned
1
and transmission mode.
• When sending a document using Immediate Transmission or when all pages have been scanned in
Memory Transmission:
• When some pages are left unscanned in Parallel Memory Transmission or Memory Transmission:
• Even if a near blank sheet is detected, it is transmitted as normal.
• You can turn this function on or off with the User Parameter (switch 11, bit 2) in the Fax Features menu.
See "Parameter Settings".
• To cancel scanning if a blank sheet is detected, press the [Clear/Stop] key.
• p.226 "Parameter Settings"
40