Setting Up The Machine - Ricoh 920F Operating Instructions Manual

1. Getting Started

Setting Up the Machine

This section explains how to enable encryption of transmitted data and configure the administrator account.
1
If you want higher security, make the following setting before using the machine.
1. Turn the machine on.
2. Press the [User Tools/Counter] key.
3. Press [System Settings] using [ ] or [ ], and then press the [OK] key.
4. Press [Interface Settings] using [ ] or [ ], and then press the [OK] key.
5. Select [Network] using [ ] or [ ], and then press the [OK] key.
6. Specify IPv4 Address.
For details on how to specify the IPv4 address, see "Interface Settings", Network and System Settings
Guide.
7. Connect the machine to the network.
14
BQP002S