Reading The Display; Reading The Display Panel And Using Keys - Ricoh 920F Operating Instructions Manual

Reading the Display

This section explains how to use the keys on the control panel and screen items.
The display guides you through operations, shows messages, machine status, and destinations registered
in the destination lists.
If you press the [Clear Modes] key during operation, the standby screen appears.
Press the [OK] key to complete the settings.
Press the [Escape] key to return to the previous screen.
• This machine automatically returns to standby mode if you do not use the machine for a certain period
of time. You can select the period using the Facsimile Auto Reset Timer in System Settings.
• The Fax Features menu includes a user parameter setting (switch 17, bit 3) that enables you to
configure the machine to return to standby mode whenever it finishes scanning an original, see
"Parameter Settings".
• To return to the standby screen manually, do one of the following:
• If you have placed the original in the Auto Document Feeder (ADF) and have not pressed the
[Start] key, remove the original.
• If you have not placed an original, press the [Clear Modes] key.
• If you are in User Tools mode, press the [User Tools/Counter] key.
• p.226 "Parameter Settings"

Reading the Display Panel and Using Keys

This section explains screen items and their corresponding keys.
1. Selection keys
Correspond to items at the bottom line on the display.
BRJ023S
13