On Hook Dial - Ricoh 920F Operating Instructions Manual

1. Transmission

On Hook Dial

The On Hook Dial function allows you to dial while listening to the tone from the internal speaker.
1
You can send a fax checking the connection.
• This function is not available for Internet Fax and IP-Fax.
1. Place the original, and then select the scan settings you require.
2. Press the [On Hook Dial] key.
You will hear a low tone from the internal speaker.
If you want to cancel this operation, press the [On Hook Dial] key again.
3. Dial.
The machine immediately dials the destination.
If you make a mistake, press the [On Hook Dial] or [Clear Modes] key, and then try again.
4. When the line is connected and you hear a high-pitched tone, press the [Start] key.
Transmission starts.
If you want to cancel a transmission, press the [Clear/Stop] key, and then remove the originals.
After transmission, the standby display appears.
• To specify a destination using a Quick Dial key, see "Using the Quick Dial Keys".
• This function is unavailable in some countries.
90
BRJ029S