1. Transmission
5.
Press [Manual].
1
6.
Enter the IP-Fax destination, and then press the [OK] key.
If you enter an incorrect character, press the [Clear/Stop] key. Then, re-enter the characters correctly.
To change the IP-Fax destination after pressing the [OK] key, press [EditDest], re-enter an IP-Fax
destination, and then press the [OK] key.
7.
To add a destination, press [Add Dest].
8.
Specify the next destination.
To add another destination, repeat steps 7 and 8.
Pressing [
9.
Press the [Start] key.
The machine starts to scan the original and stores it in memory. When scanning ends, the
Communicating indicator lights and transmission starts.
50
] switches the destination type between
and
.