Printing The Error Log - Ricoh 920F Operating Instructions Manual

Message
"Paper Tray is in use."
"Parallel I/F Error"
"Printer Font Error."
"Problem:Wireless card"
"Replace Photoconductor."
"Tray # Error"
"USB Error"

Printing the Error Log

If files could not be printed due to printing errors, print the error log to identify the problem.
• The most recent 30 errors are stored in the error log. If a new error is added when there are 30 errors
already stored, the oldest error is deleted. However, if the earliest error is a Sample Print, Locked
Print, Hold Print, or Stored Print error, it is not deleted. The error is stored separately until the number
of errors reaches 30.
• If the main power switch is turned off, the log is deleted.
Cause
The specified paper tray is in
use by another function, such
as the copier function.
An error has occurred in the
parallel interface board.
An error has occurred in the
font settings.
An error may have occurred
in the IEEE 802.11a/g card.
Replacement of
Photoconductor Unit is
necessary.
An error has occurred with
the paper tray.
# indicates the tray number.
An error has occurred in the
USB interface.
Messages Displayed When Using the Printer Function
Solution
Wait until the other function has finished
using the specified paper tray.
Contact your service representative.
Turn off the main power switch, and
back on again. If the message appears
again, contact your sales or service
representative.
Turn off the main power switch, and
back on again. If the message appears
again, contact your sales or service
representative.
Contact your service representative.
Press [JobReset] to change the paper
tray settings, or press [Form Feed] to
select another paper tray and print using
that.
Turn off the main power switch, and
back on again. If the message appears
again, contact your sales or service
representative.
4
61