Ricoh 920F Operating Instructions Manual page 637

1. Transmission
2. Select [Check/Stop TX File] using [ ] or [ ], and then press the [OK] key.
1
3. Select the file you want to cancel using [ ] or [ ], and then press [Stop TX].
4. Press [Delete].
The display returns to that of step 3.
To cancel another file, repeat from step 3.
To cancel stopping transmission, press [No].
5. Press the [Escape] key twice.
The standby display appears.
• If you cancel a transmission while the file is being sent, some pages of your file may have already
been sent and is received at the other end.
• If the transmission finishes while you are carrying out this procedure, transmission cannot be canceled.
• If multiple destinations were specified, only the number of the destinations that have not received the
document you sent is shown.
• If multiple destinations were specified, only one destination number appears.
96