Ricoh 920F Operating Instructions Manual page 1303

5. Troubleshooting When Using the Scanner Function
Message
"Exceeded max. pg. per file.
Press [Write] to wrt. scanned
data to mem. device. Or press
[Cancel] to delete."
"LDAP server auth. has failed.
Check the settings."
"LDAP server search timed
out. Check the server status."
5
"Memory device error.
Check the memory device."
"Memory device not
detected. Insert the device."
"Memory is full. Press [Write]
to write current scanned data
to memory device. Or press
[Cancel] to delete."
"No valid dest. lists. Check the
settings or the server status."
"Now loading WSD... Please
wait."
"Only one memory device
can be used in one time."
86
Cause
The scan could not be
completed because the
maximum number of pages
that can be scanned by this
machine was exceeded
during writing to the Memory
device.
The user name and password
differ from those set for LDAP
server authentication.
A network error has occurred
and connection has failed.
A non-writable medium is
being used.
There is no memory device
inserted.
The scan could not be
completed because there
was insufficient memory at the
time of saving to the memory
device.
The authentic settings for the
delivery server are incorrect.
WSD scanner function is
being prepared.
Only one memory device can
be connected at a time.
Solution
Reduce the number of documents to be
written to the memory device and try
again.
Make settings correctly for the user
name and the password for LDAP server
authentication.
Try the operation once more. If the
message is still shown, the network may
be crowded. Check the information of
System Settings. See "Administrator
Tools", Network and System Settings
Guide .
Use a different medium.
Insert a memory device, or check to see
whether the memory device is properly
inserted in the media slot.
Select whether or not to save the
scanned document to the memory
device.
Check that the delivery server is on and
the authentic settings for the delivery
server are correct.
Wait a while.
Insert one memory device only in the
media slot.