6.13 Processing a Job
This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the "Job Menu" screen, press the [Job] button.
⇒
The "Message Screen" appears.
HINT
2. Press the [Scan] button on the "Message Screen".
⇒
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to
in the Scan Viewer" (page
HINT
•
If the both title and message are not set in [Message Screen] on the "Job
Details" screen, even if the [Message Screen] button is set to [On], the
"Message Screen" will not be shown. For more details, refer to
"4.11.2 Setting a Job Sequence" (page
•
If "Off" is selected for the [Message Screen] button, scanning is started
without showing the "Message Screen", and the job is processed. For
more details, refer to
"6.13.1 Enabling/Disabling the Message Screen"
(page
352).
343).
[Scan Viewer] is initially "On".
6.13 Processing a Job
163).
"6.10 Editing the Scanned Data
fi-6010N Network Scanner Operator's Guide
6
Step 5
of
349