Fujitsu iScanner fi-6010N Operator's Manual page 502

Screen
Print
466
Message
Not connected to the network.
Access to network printer was refused.
Network path is too long.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Current login (LDAP account) has
become invalid.
Specified user is no longer able to
login to this network printer.
Specified password is no longer valid
for this network printer.
Action
Check that the system network is
functioning normally by perform-
ing a ping test from
another machine in the network,
other than the server with network
printer. If the system network is
not operating properly, refer to
"Failure to connect to a server
using its IP address" (page 393)
further solutions.
Contact a server administrator to
find out if an access permit has
been set.
Try the following:
• Set a shorter printer alias.
• Contact a system administrator
to have the network path short-
ened.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Contact a system administrator to
have the login account validated.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated again.
for