Fujitsu iScanner fi-6010N Operator's Manual page 532

Code
12020100
12030001
12030002
12030005
12030006
12030007
496
Message
Error: fax could not be sent.
Cannot find the network printer
path.
Access to network printer was
refused.
Network is busy. Try again
later.
User name or password may be
incorrect.
Not connected to the network.
Action
Try the following:
• Contact a system administrator to check
if sending fax is allowed.
• If the [e-Mail address of user] option
button is selected for "Notification To
(Sender's e-Mail Address)", an error will
occur when a job sequence is per-
formed in the following cases:
• If the currently logged in user does
not have an e-mail address
• If logged in with the guest account
In this case, specify a user with a regis-
tered e-mail address and perform the
job sequence.
Try the following:
• Check that the LAN cable of the
scannerand the print server are
connected properly.
• Contact a system administrator to check
that the print server is working properly.
• Check that the spooler is operating
correctly.
• Contact a system administrator to check
that the scanner IP address and and
SMTP server settings are correct.
"8.3 Network Connection Troubleshooting"
(page 388)
Contact a network administrator to find out
if an access permit has been set.
Wait for a few minutes, and try again.
Enter the user name and password
correctly.
Check that the system network is
functioning normally by performing a ping
text from another machine in the network,
other than the server with network folder.
If the system network is not operating
correctly, refer to "Failure to connect to a
server using its IP address" (page 393).