Fujitsu iScanner fi-6010N Operator's Manual page 328

2. Select the print scale of the data.
By default, this is "100%".
• Shrink to Fit
The image is reduced so that the entire image fits into the area available for printing (area
inside the dotted line). Further enlargement is not possible.
If the positioning setting is "Center", the control point for printing is the center point of the
area available for printing. If the positioning setting is "Top Left", the control point for
printing is the top left corner of the area available for printing. For more details on the
positioning setting, refer to
Small
292
"6.6.2 Positioning" (page
Center
Control Point
Available Area
for Printing
Print Sheet Scanned Data
Large
Scanned Data
Print Sheet
296).
Top Left
Control Point
Available Area
for Printing
Positioning
Center
Top Left
Result
Scanned Data
Scanned Data