Fujitsu iScanner fi-6010N Operator's Manual page 109

Hide thumbs Also See for iScanner fi-6010N:

Table of Contents

Multifeed may not be detected for the top and bottom 25mm of a doc-

3, if [Middle] or [Top & Bottom] is selected, enter both "#1" (upper limit) and

"#2" (lower limit).

#1: Even numbers from 0 to 508mm can be entered. Odd numbers will be made even by

#2: Even numbers from 0 to 510mm can be entered. Odd numbers will be made even by

5. Press the [OK] button.

The document area to be monitored for multifeeds is set.

4.6 Using the System Settings Menus

For multifeed detection, a length of at least 5mm is required. Specify

a value for #2 that is at least 6mm greater than that for #1.

"#2" can have a maximum value of 510mm. If the paper size setting

is long page mode but the length of the document is longer than

510mm, multifeed cannot be detected by length.

When [Middle] is selected, if the document is shorter than "#1", multi-

feed will not be detected. When [Top & Bottom] is selected, if the

document is shorter than "#2", multifeed will not be detected for the

bottom part.

If the values specified for "#1" and "#2" exceed the actual paper size,

multifeeds will not be detected.

fi-6010N Network Scanner Operator's Guide

Troubleshooting