Fujitsu iScanner fi-6010N Operator's Manual page 515

Code
110D0001 Login failed. Check the user
name and password, and try
again.
110D0002 Cannot connect to the LDAP
server.
110D0004 Access to network folder was
refused.
110D0005 Number of network path con-
nections has reached the maxi-
mum allowed. No more may be
specified.
110D0006 Invalid LDAP Search Base for-
mat.
Message
Try the following:
• Enter a user name and password, and try
• Enter a valid user name and password,
• Contact a system administrator and have
• Contact a system administrator to have
• Contact a system administrator to check
• Login is not possible if the Active Direc-
Try the following:
• The network settings may not be valid.
• The server is not working. Contact a
• If using SSL communication when con-
• Set a valid user name and password.
Contact a server administrator to find out if
an access permit has been set.
Close unneeded network connections, then
try specifying the desired network path
again.
Contact a system administrator to have the
LDAP search base format corrected.
"4.7.8 Setting the Login LDAP Server"
(page 88)
fi-6010N Network Scanner Operator's Guide
Action
again.
and try again.
them check that the LDAP server is set.
the server status checked.
if the password has expired.
tory account option is "User must
change password at next logon".Contact
an administrator to set a password, and
then try logging in.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 388)
system administrator to have the server
status checked.
necting to the LDAP server, contact an
administrator to check if the server cer-
tificate, issued from a root certification
authority, is installed on the LDAP
server.
E
479