Restoring Central Admin Settings - Fujitsu iScanner fi-6010N Operator's Manual

5.13.2 Restoring Central Admin Settings

Central admin settings that has been backed up can be restored to the Central Admin Server.
To restore central admin settings, execute "AmRestore.exe" from the command prompt on the
personal computer installed with the Central Admin Server software.
• Command storage location
Under the "Bin" folder in the installation folder of the Central Admin Server software
• Command executable format
AmRestore.exe backup_folder_name
The character string shown in italics is variable.
ATTENTION
HINT
246
•
Make sure to run the AmRestore.exe command after changing the current
directory to the Bin folder in the installation folder of the Central Admin Server
software.
•
The language for the backup and restore Central Admin Servers must be the
same. If languages are different, Central Admin may not operate correctly
when restoring.
•
For Windows® 2000 Server, IIS will be stopped while a command is running.
•
The admin password is not backed up and restored by using the
AmBackup.exe and AmRestore.exe commands. Even if the
AmRestore.exe command is executed, the admin password is not changed.
•
For Windows Server® 2008, to use HTTPS for communication to a scanner, or
personal computer installed with the Central Admin Console, additional set-
tings may be required for the target Central Admin Server to be restored. For
more details, refer to "Importing the Certificate" (page 201).