[New] Button - Fujitsu iScanner fi-6010N Operator's Manual

• Comment
Enter a part of or entire comment on the scanner to be filtered.
This may be up to 64 characters long. Line-feed cannot be used.
• Status
Select the status of the scanner to be filtered.
The default is "(All)".
• [Refresh List] button
Refreshes the list by filtering using the entered filtering conditions.

■ [New] button

The button displays the "Edit Scanner Details" window to add scanner configuration information.
• Scanner Name (Required)
Enter the scanner name.
This may be up to 15 characters long. Alphanumerical characters and hyphens may be used.
Scanner names cannot consist of numerical characters only.
A hyphen cannot be used as the first character of a scanner name.
• IP Address
Enter the numeric IP address.
This may be up to 15 characters long. Numbers and periods (.) may be used.
• MAC Address
Enter the MAC address of the scanner.
This may be up to 17 characters long. Alphanumeric characters and colons (:) may be used.
• Settings Group
Enter the settings group of the scanner. Press the list button to select a settings group name
from the currently used settings groups.
This group name is used to identify the settings contents of a group.
The settings group name entered here is displayed on the "Scanner Settings" window, Set-
tings Groups.
This may be up to 32 characters long.
The following character strings cannot be used:
(Default)
"__" is two underbars entered one after another.
• Add-in Group
Enter the Add-in group of the scanner. Press the list button to select an Add-in group name
from the currently used Add-in groups.
This group name is used to identify an Add-in module.
224
(All) __default__ __all__