Fujitsu iScanner fi-6010N Operator's Manual page 33

Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner contains high-
voltage components. Touching these components might cause electric shock or fire.
Do not use aerosol sprays near the scanner.
Do not use any aerosol sprays or alcohol based sprays to clean the scanner.
Dust blown up by strong air from the spray may enter the inside of the scanner. This
may cause the scanner to fail or malfunction.
Sparks, caused by static electricity, generated when blowing off dust and dirt from the
outside of the scanner may cause a fire.
Do not place the scanner within the reach of small children.
To avoid injuries, do not place the scanner in an area where small children may be able
to reach.
Do not touch the heated section for a long time.
Do not touch the heated section such as the bottom of the scanner for a long time.
Doing so may cause a low-temperature burn on your skin.
Do not cover the scanner with something during its operation.
Do not use the scanner while covered with a blanket, etc. Doing so may raise the
temperature inside and cause a fire.
Do not use the scanner where it gets wet.
Do not use the scanner at a place such as a bathroom, shower room, or swimming pool
where it may easily get wet. Doing so might cause electric shock or fire.
fi-6010N Network Scanner Operator's Guide xxxi