Paper Requirements; Paper Type; Paper Weight; Precautions - Fujitsu iScanner fi-6010N Operator's Manual

A.2 Paper Requirements

A.2.1 Paper Type
The following paper types are recommended for use with the ADF:
• Woodfree paper
• Wood containing paper
When documents of a paper type other than those listed above are used, test-scan a few sheets first
to check if the document can be scanned without problem.
A.2.2 Paper Weight
The following paper weights can be used with the ADF:
• For general scanning
•
52 g/m
•
For A8 and Business Card size, 127 g/m
• For scanning with a Carrier Sheet
•
Up to 127 g/m
•
Up to 63.5 g/m
A.2.3 Precautions
The following documents may not scan successfully:
• Documents of non-uniform thickness (e.g. envelopes and documents with attachments)
• Wrinkled or curled documents (See the following HINT)
• Folded or torn documents
• Documents with appended photographs, notes, etc.
• Tracing paper
• Coated paper
• Carbon paper
• Carbonless paper
• Photosensitive paper
• Perforated or punched documents
• Documents that are not square or rectangular
• Exceptionally thin documents (less than 52 g/m
• Photographs
Do not attempt to scan the following types of documents:
• Paper-clipped or stapled documents
• Documents on which the ink is still wet
• Documents smaller than A8 Portrait
• Documents wider than Letter size (8.5inches = 216mm, A4 is 210mm wide)
• Non-paper documents (such as fabric, foil, transparent paper)
2 2
to 127 g/m (14 lb to 34 lb)
2
(Up to 34 lb)
2
(Up to 17 lb) (when scanning half fold paper)
2
only
2
)
fi-6010N Network Scanner Operator's Guide
A
411